The GMW high volume air sampler incorporate the classic "birdhouse"
design for the collection of total suspended particulates. This constant
rate sampler can be configured with various sampling media (glass fibre,
quartz, Teflon) for subsequent pollutant analysis. The arrangement includes:
 |
-
Volumetric or Mass Flow Controller
-
Brushless High Volume Motor/Blower
-
Mechanical Timer (7-day))
-
Continuous Flow Recorder and Chart Paper
-
Anodized Aluminum Shelter
Power Requirements:
115 Volts AC
Shipping Size and Weight:
1 Package and 80 lbs
Helpful Hints:
Flow rates of 20 to 60 standard cfm can be achieved.
The 'birdhouse' design requires shipping in one
container. Please allow additional time for shipping
prior to the start of your project to avoid large
shipping
costs.
|
General Metal Works (GMW) Model IP-l0 PM-I0 Monitor
This GMW high volume air sampler is designed for collecting particulate
matter equal to and less than 10 microns in diameter. The unit incorporates
the classic "birdhouse" design with the addition of the selective PM10
inlet head. The arrangement includes:
 |
-
PM10 Selective inlet Head
-
Volumetric or Mass Flow Controller
-
Brushless High Volume Motor/Blower
-
Mechanical Timer (7-day)
-
Continuous Flow Recorder and Chart Paper
-
Anodized Aluminum Shelter
Power Requirements:
115 Volts AC
Shipping Size and Weight:
2 Packages and 110 lbs
Helpful Hints:
Flow rates of approximately 40 scfm can be
achieved. This 'birdhouse' design requires
shipping in two containers, the sampler in one
and
the PM-10 head in another. Please allow
additional time for shipping prior to the start
of
your project to avoid large shipping costs.
|
General Metal Works (GMW) Four-Stage Cascade Impactor
This GMW high volume air sampler is designed for determining particle
size distribution. The unit incorporates the classic "birdhouse" design
and can be coupled with four collection plates that aerodynamically sizes
the collected particles. With the addition of the PM-10 selective inlet,
the sized particles can be controlled to less than particles of 10 microns
in diameter. Effective cut sizes at standard flow rates are 10.0, 7.2,
3.0, 1.5 and 0.95 microns (using the PM-10 inlet and plates). The arrangement
includes:
-
PM-10 Selective Inlet Head
-
Four-Stage Impaction Plates
-
Volumetric or Mass Flow Controller
-
Brushless High Volume Motor/Blower
-
Mechanical Timer (7-day)
-
Continuous Flow Recorder and Chart
Paper
-
Anodized Aluminum Shelter
Power Requirements:
115 Volts AC
|
Helpful Hints:
Flow rates of approximately 20 scfm can be
achieved. This 'birdhouse' design requires
shipping in 2 containers, the sampler in one
and the PM-10 head in the other. Please
allow additional time for shipping prior to
the start of your project to avoid large shipping
costs.
Shipping Size and Weight:
2 Packages and 130 lbs
|
General Metal Works (GMW) Model GPS-1 PUF Sampler
This GMW low volume air sampler is designed for the collection of suspended
airborne particulates and pesticide/organic vapors. The unit incorporates
the classic "birdhouse" design with a dual chamber sampling module; particulate
filter (4") and glass cartridge w/ polyurethane foam insert. The arrangement
includes:
 |
-
Flow Venturi
-
Low Volume By-pass Motor/Blower
-
Mechanical Timer (7-day)
-
Magnehelic Gauge
-
Anodized Aluminum Shelter
Power Requirements:
115 Volts AC
Shipping Size and Weight:
1 Package and 75 lbs
|
Xontech Model 911A Portable Canister Sampler
This Xontech canister sampler is designed to collect whole
air samples into SUMMA electropolished, precleaned canisters. The sampler
can be used to collect air samples for characterization of emissions at
landfills, surface impondment, landspreading, drum burial or waste piles.
The arrangement includes:
 |
-
Adjustable Flow Rate
-
7-day, 10-event Timer
-
Stainless Steel, Non-lubricated Pump
(Sample Pressurized to 25 psi)
-
Lockable Aluminum Enclosure
Power Requirements:
Battery or 115 Volts AC
Shipping Size and Weight:
1 Package and 20 lbs
|
Helpful Hints:
The sampler does not include pre-cleaned Summa canisters. Please specify
how many canisters you will need.
