Model Pump Pak II
DESCRIPTION
The California Analytical Instruments’ Pump Pak II was
designed to
provide sample gas(es) to analyzers that do not have built-in sample
delivery systems.
The Pump Pak II has two adjustable flow control rotometers labeled
“sample” and “bypass”. These
can be used to feed two separate analyzers
at independent flow rates or pressures. As an alternative, the bypass
can be discharged to a safe vent and adjusted as necessary to provide a
fast flowing bypass loop whenever response times need to be minimized.
SPECIFICATIONS
SAMPLE CONTACT MATERIAL: 316 Stainless Steel, Teflon, Glass
PUMP HEAD & DIAPHRAGM: Polycarbonate & Viton
MAXIMUM Distance (Draw through 1/4” Tube): 50’ for
a flow rate of 4.5 LPM @ 7 psig (one stream only)
INLET SAMPLE CONDITION: Non-condensing
sample gas with a relative humid (R.H.) of 60% or less
SAMPLE TEMPERATURE: 0 to 50°C
Ambient Temperature: -5 to 45°C
FITTINGS: 1/4” Tube
Current Draw at Maximum LOAD: 1.1 Amps
POWER REQUIREMENTS: 115/220 VAC, 50/60Hz
DIMENSIONS: 5-1/4”H x 19”W x 8”D
WEIGHT: 14 lbs.
FEATURES
- Externally Accessible 5 Micron Particulate Filter
- Two Independently Adjustable Sample Flows
- Suitable for Desktop Operation or 19” Rack
Mounting
- 100% Oil-Free Operation
- Built-in Fast Loop Bypass for Quick Response Requirements
|
|
