PM 2.5 High Volume Sampler System
The Hi-Vol PM 2.5
ambient air sampler is designed
to provide owners of our TE-6001 PM-10 samplers with the option of
retrofitting existing equipment rather than procure a new family of
apparatus. An adapter is placed into the model TE-6001 sampler in lieu
of the existing PM 2.5 fractonator. The adapter has a new plate that
contains multiple impactors, which collect particles larger than PM 2.5
aersol on a oil-wetted surface. The PM 2.5 aerosol is transmitted
through the impactor and collected on a hi-vol filter. |
TE 6001 2.5-1
Complete Inlet
| TE-6070V-2.5 HVS Complete
40 ACFM PM 2.5 High Volume System Includes: 2.5 (40CFM) size selective
inlet, anodized aluminum shelter, 8” x 10”
stainless steel filter holder, aluminum blower motor assembly,
continuous flow/pressure recorder, elapsed time indicator, filter media
holder, volumetric flow controller with look up table, 7-day mechanical
timer, 30” water manometer. Complete System |
| TE-6070-V2.5-HVS Complete
40 SCFM PM 2.5 High Volume System Includes: 2.5 (40CFM) size selective
inlet, anodized aluminum shelter, 8” x 10”
stainless steel filer holder, aluminum blower motor assembly,
continuous flow/pressure recorder, elapsed time indicator, filter media
holder, mass flow controller w/20-60 SCFM air flow probe, 7-day
mechanical timer. Complete System |
| TE-6070-V-2.5-HVS-BL For
Volumetric Flow Controlled Brushless Version Complete System |
TE-6070-V-2.5-HVS-BL For
Mass Flow Controlled Brushless Version Complete System
|
PM 2.5 Retro Fit Kit
|
| TE-6001-2.5 Complete Kit
to Retro-Fit Existing 40 CFM PM 10 System to PM 2.5 Micron |
TE-6001-2.5-I Complete 40
CFM PM 2.5 micron size selective inlet only
|
|
Replacement Parts for 40CFM 2.5 Retro Fit
Kit
|
| TE-6001-2.5-1 |
Acceleration Plate |
| TE-6001-2.5-2 |
Gasket for
Acceleration Plate |
| TE-6001-2.5-3 |
Gasket for Top of Bug
Screen |
| TE-6001-2.5-4 |
Bug Screen |
| TE-6001-2.5-5 |
Screen and Nozzle
Plate Adapter |
| TE-6001-2.5-6 |
Acceleration Nozzle
Plate |
| TE-6001-2.5-7 |
Acceleration Nozzles
(each) |
| TE-6001-2.5-8 |
Oil Absorbent Ring
Hold Down |
| TE-6001-2.5-9 |
Two Ply Oil Absorbent
Ring |
| TE-6001-2.5-10 |
Gasket for Oil
Absorbent Holder |
| TE-6001-2.5-11 |
Oil Absorbent Holder |
| TE-6001-2.5-12 |
Bolt and Nut (set of
4) |
| TE-6001-2.5-13 |
Bolt and Nut (set of
6) |
| TE-6001-2.5-14 |
Spacer Bolt Assembly
with Nut each (4 required) |
| TE-6001-2.5-15 |
Oil for 2.5 Retro-Fit
Kit (Wins Oil) 5 oz. |
|
|
