50 Best Managed Company
Calco Environmental Group recognized by Deloitte as one of Canada's 50 Best Managed Company Award
Gamme de produits » Tisch Environmental » spm 613d
spm 613d

The Beta Gauge Method PM2.5/PM10/OBC Dichotomous Monitor SPM-613D

The SPM-613D continuously measures fine particles (PM2.5), coarse particles (PM10) and black carbon originating from diesel exhaust, providing all of your particulate monitoring needs in just one instrument.

Virtual Impactor

Simultaneous and continuous measurement ( one hour cycle) for both coarse and fine particles using the virtual impactor.

Easy Operation

The instrument is easy to operate using the well-engineered interface with the touch screen display. The data is available to download using the Internet anywhere in the world, because the instrument has an IP address. (A PC with an Ethernet port is necessary.)

Fluorocarbon Filter

By adoption of the fluorocarbon membrane filter, the instrument is less subject to humidity than the glass-fiber filters. Therefore, the measurement accuracy is improved substantially.

Determination of OBC

The black carbons from the diesel sources can be measured by OBC ( Optical Black Carbon) sensor. OBC is also measured with PM2.5 and PM10, simultaneously.

Hi-performance

  • Self Diagnostics
  • Sampling Period Max.1 Month with One Roll Filter
  • Digital Transmission Ethernet (10Base-T)

Specifications

Pollutant Fine (<2.5um) and coarse (>2.5um)
weight concentration,
OBC (Optical Black Carbon)
Separation method Virtual Impactor
Principles Beta-ray absorption
Ray source 147PM, ray source less than 3.7MBq
Detector Plastic scintillation method
OBC sensor Infrared reflection type
Sampling method Filter method
(Roll tape filter: w20mm x 30m,
Max 1 month in 1 hour normal setting)
Range 0.0000-1.0000 mg/m3
Measuring cycle 1, 2, 3, 4, 6, 12 hours
Flow rate 16.7 L/min
Power AC 115V, 50/60HZ
Power construction Analyzer unit: approx. 80 VA
Pump unit: approx.450 VA
Temp. range 0-40 degC (32-104 degF)
Min. detectability less than 0.002 mg/m3
Repeatablity less than +/- 2 % /FS
Zero drift less than +/- 1 % /FS /week
Span drift less than +/- 2 % /FS /week
Linearity less than +/- 3 % /FS
Measuring signal 0-1 V DC and the serial output
Event markers Reset signal, Host stop signal, Adjust
signal, Power down signal, Abnormal signal, Tape out signal
Data retrieval CSV file is available from Ethernet
port to some PCs
Weight Analyzer unit: approx 15.5 kg (34 lbs)
Pump unit: approx 12 kg (26.4 lbs)
Dimensions 430W x 400D x 220H mm
(17" x 15.75" x 8.66")
Option Data transmission system via internet

Block Diagram


Outdoor Enclosure

Field Test

Download PDF Brochure