Call toll free in Canada 1 866 840 0014

Sign In   Fr   1 905-643-8000 or toll free in Canada 1 866 840 0014
Systems & Shelters Manufacturers Service & Support
Gas Analyzers
Sulfur Compounds Nitrogen Compounds Carbon/Oxygen Compounds Ozone Calibration
Particulate Instruments
Continuous Particulate Monitors Particulate Samplers VOCs & Speciation Flow Calibration
Industrial Emissions & Hygiene
Isokinetic Sampling Methods Gaseous Source Sampling Industrial Hygiene
Systems & Shelters Manufacturers Service & Support
Particulate Samplers - PM10, PM2.5, and PM1, TSP, Speciation

TE-WILBUR PM2.5 and PM10 FRM Sampler    Get Quote

The Tisch Environmental TE-Wilbur is the most advanced low volume air sampler system in the industry. The TE-Wilbur can be configured for TSP, PM10, PM2.5, PM1 as well as any other particulate separation device with a flow rate between 1-25 SLPM. Featuring modern, industrially hardened components paired with innovative design and state of the art manufacturing practices, the TE-Wilbur is the future of particulate collection. The TE-Wilbur is ideal for Environmental Monitoring, Fence Line Monitoring and Industrial Monitoring.   Learn More

TE-WILBUR PM2.5 and PM10 FRM Sampler    Get Quote

The Tisch Environmental TE-Wilbur is the most advanced low volume air sampler system in the industry. The TE-Wilbur can be configured for TSP, PM10, PM2.5, PM1 as well as any other particulate separation device with a flow rate between 1-25 SLPM.  Learn More

TE-6070 PM10 High Volume Air Sampler    Get Quote

The Tisch Environmental TE-6070 PM10 high volume air sampler collects particulates at a flow rate between 36-60 ft3/min through a PM10 size selective inlet. As the particulates travel through the size selective inlet, the larger particulates are trapped inside of the inlet as the smaller PM10 particulates continue to travel through the PM10 inlet and are collected on the 8" x 10" quartz filter paper. This quartz filter is weighed previously to sampling and then after sampling to determine the mass of particulates that are smaller than 10 microns.  Learn More

TE-6070 PM10 High Volume Air Sampler    Get Quote

The Tisch Environmental TE-6070 PM10 high volume air sampler collects particulates at a flow rate between 36-60 ft3/min through a PM10 size selective inlet. This sampler uses a size selective inlet to separate out the particulate matter that is larger than 10µm, ensuring that only concentrations of PM10 are deposited onto the filter.  Learn More

TSP PLUS High Volume Air Sampler    Get Quote

The MFC PLUS system is the most advanced TSP ambient particulate sampler on the market. It utilizes a microprocessor based controller for instantaneous and accurate flow control. The system's built in temperature and barometric pressure sensors along with the microprocessor-based mass flow controller allow the system to accurately calculate the flow rate. The PLUS technology flow controllers include a built in digital timer with internal battery backup, multiple elapsed time indicators, and four data logs with an external USB drive for data retrieval.  Learn More

TSP PLUS High Volume Air Sampler    Get Quote

The MFC PLUS system is the most advanced TSP ambient particulate sampler on the market. It utilizes a microprocessor based controller for instantaneous and accurate flow control. The system’s built in temperature and barometric pressure sensors along with the microprocessor-based mass flow controller allow the system to accurately calculate the flow rate.  Learn More

TE-5170 TSP High Volume Air Sampler    Get Quote

Mass Flow Controlled (MFC) TSP particulate samplers use a hot wire anemometer probe to control the flow rate. The hot wire anemometer probe is inserted into the flow stream and automatically adjusts the motor speed as the filter begins to collect particulate. These systems are available with either a 7 day mechanical timer or a US EPA recommended digital timer to ensure accurate sampling results. Motor options include your choice of a brush style motor or a brushless style motor. Please review the chart below to view our extensive offering of mass flow controlled TSP high volume air samplers.  Learn More

TE-5170 TSP High Volume Air Sampler    Get Quote

Mass flow Controlled or MFC tsp particulate samplers use a hot wire anemometer probe to control the flow rate. The hot wire anemometer probe is inserted into the flow stream and automatically adjusts the motor speed as the filter begins to collect particulate.  Learn More

TE-5170V TSP High Volume Air Sampler    Get Quote

Volumetric Flow Controlled (VFC) TSP particulate samplers use a critical orifice with a predetermined orifice hole diameter to control the flow rate. The critical orifice is drilled and calibrated to let only the predetermined flow rate to pass through the filter. The motor on these systems operate wide open while the critical orifice maintains a constant flow rate. These systems are available with a 7 day mechanical timer or a US EPA reccomended digital timer. These systems can be fitted with an economical brush style motor or a maintenance free brushless motor.  Learn More

TE-5170V TSP High Volume Air Sampler    Get Quote

Volumetric flow controlled (VFC) TSP particulate samplers use a critical orifice with a predetermined orifice hole diameter to control the flow rate. The critical orifice is drilled and calibrated to let only the predetermined flow rate to pass through the filter.  Learn More

TE-5170VFC+ TSP High Volume Air Sampler    Get Quote

Built on the same platform as the MFC PLUS controller, the VFC PLUS system accurately calculates and records the volumetric flow rate of the TSP, PM10 or PM2.5 high volume air sampler. The VFC PLUS controller use the ambient barometric pressure, ambient temperature and the pressure drop across the filter holder to accurately calculate the actual ambient volumetric flow rate. All sample data is log and can be downloaded via the USB port and viewed using any spreadsheet program. The integrated digital timer allows for accurate sample scheduling and also has an internal battery backup to ensure that samples schedules are not violated due to intermittent on-site power failures.  Learn More

TE-5170VFC+ TSP High Volume Air Sampler    Get Quote

Built on the same platform as the MFC PLUS controller, the VFC PLUS system accurately calculates and records the volumetric flow rate of the TSP, PM10 or PM2.5 high volume air sampler. The VFC PLUS controller use the ambient barometric pressure, ambient temperature and the pressure drop across the filter holder to accurately calculate the actual ambient volumetric flow rate.  Learn More

PQ100 FRM Sampler    Get Quote

The BGI PQ100 FRM Sampler incorporates BGI pioneering technology to meet the requirements for ambient particulate sampling dictated by the U.S. Environmental Protection Agency. This includes the design of PM10, PM2.5 and PM1 Inlets, volumetric sample flow rate control, data logging and software for report and data processing.  Learn More

PQ100 FRM Sampler    Get Quote

The BGI PQ100 FRM Sampler incorporates BGI pioneering technology to meet the requirements for ambient particulate sampling dictated by the U.S. Environmental Protection Agency.  Learn More

PQ200 Ambient Air Particulate Sampler    Get Quote

The BGI PQ200 FRM Sampler uses BGI pioneering technology to meet and exceed the requirements for ambient particulate sampling dictated by the U.S Environmental Protection Agency. This includes the design of reliable PM10, PM2.5 and PM1 Inlets, volumetric sample flow rate control, data logging and software for report and data processing. Portable sampler for TSP, PM10, PM2.5, PM Coarse, and PM1  Learn More

PQ200 Ambient Air Particulate Sampler    Get Quote

The BGI PQ200 FRM Sampler uses BGI pioneering technology to meet and exceed the requirements for ambient particulate sampling dictated by the U.S Environmental Protection Agency.  Learn More

OMNI™ FT Ambient Air Sampler    Get Quote

The US Environmental Protection Agency (EPA) encourages state and local air monitoring groups to conduct short-term multi-site pollutant monitoring studies using non-reference method, small portable samplers. The concept is to "saturate" an area with easily deployed, inexpensive filter samplers, to assess air quality in areas with high concentrations of pollutants or at reclamation sites. BGI has brought this approach to its ultimate development with the addition of a true 5 liter per minute (LPM) inlet.  Learn More

OMNI™ FT Ambient Air Sampler    Get Quote

The US Environmental Protection Agency (EPA) encourages state and local air monitoring groups to conduct short-term multi-site pollutant monitoring studies using non-reference method, small portable samplers.  Learn More

Particulate Monitors Ambient Air Sampling Flow Calibration

1290 Arvin Ave., Unit 7
Stoney Creek ON, L8E 0H7
T: 1 905-643-8000 | F: 1 905-643-8001

1290 Arvin Ave., Unit 7
Stoney Creek ON, L8E 0H7
T: 1 905-643-8000
F: 1 905-643-8001

Keep up to date with Pacwill newsletters!